Слияние кода завершено, страница обновится автоматически
# Top level Makefile for wrf system
LN = ln -s
MAKE = make -i -r
MV = /bin/mv
RM = /bin/rm -f
CHEM_FILES = ../chem/module_aerosols_sorgam.o \
../chem/module_gocart_aerosols.o \
../chem/module_mosaic_driver.o \
../chem/module_input_tracer.o \
../chem/module_aerosols_soa_vbs.o
CHEM_FILES2 = ../chem/module_data_mosaic_asect.o
# these files are needed to compile 'phys' in wrfplus mode
MODS4 = ../wrftladj/module_mp_mkessler.o ../wrftladj/module_mp_nconvp.o \
../wrftladj/module_bl_surface_drag.o ../wrftladj/module_cu_du.o
MODMP = ../wrftladj/module_mp_mkessler.o ../wrftladj/module_mp_nconvp.o
MODBL = ../wrftladj/module_bl_surface_drag.o
MODCU = ../wrftladj/module_cu_du.o
# this file is needed to compile module_integrate.F and module_cpl.F under frame in wrfplus mode
MODLL = ../wrftladj/module_linked_list2.o ../share/module_model_constants.o
# these 2 file are needed to compile mediation_integrate.F under share in wrfplus mode
MODPT = ../dyn_em/module_bc_em.o ../wrftladj/mediation_pertmod_io.o
deflt :
@ echo Please compile the code using ./compile
include ./configure.wrf
EM_MODULE_DIR = -I../dyn_em
EM_MODULES = $(EM_MODULE_DIR)
DA_WRFVAR_MODULES = $(INCLUDE_MODULES)
DA_WRFVAR_MODULES_2 = $(INC_MOD_WRFVAR)
DA_CONVERTOR_MOD_DIR = -I../var/convertor -p../var/convertor
DA_CONVERTOR_MODULES = $(DA_CONVERTOR_MOD_DIR) $(INCLUDE_MODULES)
#### 3.d. add macros to specify the modules for this core
ALL_MODULES = \
$(EM_MODULE_DIR) \
$(INCLUDE_MODULES)
configcheck:
@echo " "
@echo "============================================================================================== "
@echo " "
@echo "The following indicate the compilers selected to build the WRF system"
@echo " "
@echo "Serial Fortran compiler (mostly for tool generation):"
@echo which SFC
@which `echo $(SFC) | cut -d " " -f1`
@echo " "
@echo "Serial C compiler (mostly for tool generation):"
@echo which SCC
@which `echo $(SCC) | cut -d " " -f1`
@echo " "
@echo "Fortran compiler for the model source code:"
@echo which FC
@if command -v timex > /dev/null 2>&1; then \
which `echo $(FC) | cut -d " " -f2` ; \
echo "Will use 'timex' to report timing information" ; \
elif command -v time > /dev/null 2>&1; then \
which `echo $(FC) | cut -d " " -f2` ; \
echo "Will use 'time' to report timing information" ; \
else \
which `echo $(FC) | cut -d " " -f1` ; \
fi
@echo " "
@echo "C compiler for the model source code:"
@echo which CC
@which `echo $(CC) | cut -d " " -f1`
@echo " "
@echo "============================================================================================== "
@echo " "
@if [ "$(A2DCASE)" -a "$(DMPARALLEL)" ] ; then \
echo "------------------------------------------------------------------------------" ; \
echo "WRF CONFIGURATION ERROR " ; \
echo "The $(A2DCASE) case requires a build for only single domain. " ; \
echo "The $(A2DCASE) case cannot be used on distributed memory parallel systems. " ; \
echo "Only 3D WRF cases will run with the options that you selected. " ; \
echo "Please choose a different case, or rerun configure and choose a different set of options." ; \
echo "------------------------------------------------------------------------------" ; \
exit 2 ; \
fi
@if [ "$(A1DCASE)" -a "$(DMPARALLEL)" ] ; then \
echo "------------------------------------------------------------------------------" ; \
echo "WRF CONFIGURATION ERROR " ; \
echo "The $(A1DCASE) case requires a build for only single domain. " ; \
echo "The $(A1DCASE) case cannot be used on distributed memory parallel systems. " ; \
echo "Only 3D WRF cases will run with the options that you selected. " ; \
echo "Please choose a different case, or rerun configure and choose a different set of options." ; \
echo "------------------------------------------------------------------------------" ; \
exit 21 ; \
fi
framework_only : configcheck
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" ext
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" toolsdir
/bin/rm -f main/libwrflib.a main/libwrflib.lib
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" framework
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" shared
wrf : framework_only
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" physics
@if [ \( ! -f run/MPTABLE.TBL \) -o \
\( ! -f phys/module_sf_noahmpdrv.F \) -o \
\( ! -f phys/module_sf_noahmp_glacier.F \) -o \
\( ! -f phys/module_sf_noahmp_groundwater.F \) -o \
\( ! -f phys/module_sf_noahmplsm.F \) ] ; then \
echo " " ; \
echo "------------------------------------------------------------------------------" ; \
echo "Error Error Error NoahMP submodule files not populating WRF directories" ; \
echo "------------------------------------------------------------------------------" ; \
echo " " ; \
exit 31 ; \
else \
echo "------------------------------------------------------------------------------" ; \
echo "NoahMP submodule files populating WRF directories" ; \
echo "------------------------------------------------------------------------------" ; \
fi
@if [ \( ! -f phys/module_bl_mynnedmf.F \) -o \
\( ! -f phys/module_bl_mynnedmf_common.F \) -o \
\( ! -f phys/module_bl_mynnedmf_common.F \) ] ; then \
echo " " ; \
echo "------------------------------------------------------------------------------" ; \
echo "Error Error Error MYNN-EDMF submodule files not populating WRF directories" ; \
echo "------------------------------------------------------------------------------" ; \
echo " " ; \
exit 31 ; \
else \
echo "------------------------------------------------------------------------------" ; \
echo "MYNN-EDMF submodule files populating WRF directories" ; \
echo "------------------------------------------------------------------------------" ; \
fi
if [ $(WRF_CHEM) -eq 1 ] ; then $(MAKE) MODULE_DIRS="$(ALL_MODULES)" chemics ; fi
if [ $(WRF_EM_CORE) -eq 1 ] ; then $(MAKE) MODULE_DIRS="$(ALL_MODULES)" em_core ; fi
if [ $(WRF_HYDRO) -eq 1 ] ; then $(MAKE) MODULE_DIRS="$(ALL_MODULES)" wrf_hydro ; fi
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em em_wrf )
( cd run ; /bin/rm -f wrf.exe ; ln -s ../main/wrf.exe . )
if [ $(ESMF_COUPLING) -eq 1 ] ; then \
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em em_wrf_SST_ESMF ) ; \
fi
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
wrfplus : configcheck
@/bin/rm -f real.exe > /dev/null 2>&1
@/bin/rm -f tc.exe > /dev/null 2>&1
@/bin/rm -f ndown.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" ext
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" toolsdir
/bin/rm -f main/libwrflib.a main/libwrflib.lib
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" framework_plus
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" shared
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" physics_plus
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" em_core
$(MAKE) MODULE_DIRS="$(ALL_MODULES)" wrftlmadj
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em em_wrfplus )
( cd run ; /bin/rm -f *.exe ; ln -s ../main/*.exe . )
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
all_wrfvar :
$(MAKE) MODULE_DIRS="$(DA_WRFVAR_MODULES)" ext
$(MAKE) MODULE_DIRS="$(DA_WRFVAR_MODULES)" toolsdir
if [ $(CRTM) -ne 0 ] ; then \
(cd var/external/crtm_2.3.0; $(MAKE) $(J)) ; \
fi
if [ $(BUFR) ] ; then \
(cd var/external/bufr; \
$(MAKE) $(J) FC="$(SFC)" CC="$(SCC)" CPP="$(CPP)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" FFLAGS="$(FCOPTIM) $(FORMAT_FIXED) $(FCCOMPAT)" RANLIB="$(RANLIB)" AR="$(AR)" ARFLAGS="$(ARFLAGS)" ) ; \
fi
### Use 'make' to avoid '-i -r' above:
if [ $(WAVELET) ] ; then \
( cd var/external/wavelet; \
make CC="$(SC99) -DNOUNDERSCORE" RM="$(RM)" libWavelet.a; \
make FC="$(FC)" RM="$(RM)" lib_wavelet.a ) ; \
fi
# ( cd var/build; touch depend.txt; make links; make depend; $(MAKE) $(J) all_wrfvar )
( cd var/build; make depend; $(MAKE) $(J) all_wrfvar )
( cd var/obsproc; $(MAKE) $(J) BUFR_CPP="$(BUFR_CPP)" )
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
gen_be :
$(MAKE) MODULE_DIRS="$(DA_WRFVAR_MODULES)" ext
$(MAKE) MODULE_DIRS="$(DA_WRFVAR_MODULES)" toolsdir
( cd var/build; make depend; $(MAKE) $(J) gen_be )
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
# Eulerian mass coordinate initializations
em_fire : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=fire em_ideal )
( cd test/em_fire ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_fire ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_fire ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd test/em_fire ; /bin/sh create_links.sh )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_fire/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_fire/input_sounding . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_quarter_ss : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
( cd test/em_quarter_ss ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_quarter_ss ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_quarter_ss ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd test/em_quarter_ss ; /bin/rm -f bulkdens.asc_s_0_03_0_9 ; ln -s ../../run/bulkdens.asc_s_0_03_0_9 . )
( cd test/em_quarter_ss ; /bin/rm -f bulkradii.asc_s_0_03_0_9 ; ln -s ../../run/bulkradii.asc_s_0_03_0_9 . )
( cd test/em_quarter_ss ; /bin/rm -f capacity.asc ; ln -s ../../run/capacity.asc . )
( cd test/em_quarter_ss ; /bin/rm -f coeff_p.asc ; ln -s ../../run/coeff_p.asc . )
( cd test/em_quarter_ss ; /bin/rm -f coeff_q.asc ; ln -s ../../run/coeff_q.asc . )
( cd test/em_quarter_ss ; /bin/rm -f constants.asc ; ln -s ../../run/constants.asc . )
( cd test/em_quarter_ss ; /bin/rm -f kernels.asc_s_0_03_0_9 ; ln -s ../../run/kernels.asc_s_0_03_0_9 . )
( cd test/em_quarter_ss ; /bin/rm -f kernels_z.asc ; ln -s ../../run/kernels_z.asc . )
( cd test/em_quarter_ss ; /bin/rm -f masses.asc ; ln -s ../../run/masses.asc . )
( cd test/em_quarter_ss ; /bin/rm -f termvels.asc ; ln -s ../../run/termvels.asc . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_quarter_ss/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_quarter_ss/input_sounding . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_squall2d_x : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
( cd test/em_squall2d_x ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_squall2d_x ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_squall2d_x ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_squall2d_x/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_squall2d_x/input_sounding . )
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_squall2d_y : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
( cd test/em_squall2d_y ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_squall2d_y ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_squall2d_y ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_squall2d_y/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_squall2d_y/input_sounding . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_b_wave : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
( cd test/em_b_wave ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_b_wave ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_b_wave ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_b_wave/namelist.input . )
( cd run ; /bin/rm -f input_jet ; ln -s ../test/em_b_wave/input_jet . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_les : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
( cd test/em_les ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_les ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_les ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_les/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_les/input_sounding . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_seabreeze2d_x : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
( cd test/em_seabreeze2d_x ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_seabreeze2d_x ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_seabreeze2d_x ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ; \
ln -sf ../../run/LANDUSE.TBL . ; \
ln -sf ../../run/RRTM_DATA . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_seabreeze2d_x/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_seabreeze2d_x/input_sounding . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_convrad : wrf
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
( cd test/em_convrad ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_convrad ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_convrad ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ; \
ln -sf ../../run/LANDUSE.TBL . ; \
ln -sf ../../run/RRTMG_LW_DATA . ; \
ln -sf ../../run/RRTMG_SW_DATA . ; \
ln -sf ../../run/ozone.formatted . ; \
ln -sf ../../run/ozone_lat.formatted . ; \
ln -sf ../../run/ozone_plev.formatted . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_convrad/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_convrad/input_sounding . )
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
em_tropical_cyclone : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=tropical_cyclone em_ideal )
( cd test/em_tropical_cyclone ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_tropical_cyclone ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_tropical_cyclone ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ; \
ln -sf ../../run/LANDUSE.TBL . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_tropical_cyclone/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_tropical_cyclone/input_sounding . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_scm_xy : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=scm_xy em_ideal )
( cd test/em_scm_xy ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_scm_xy ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_scm_xy ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ; \
ln -sf ../../run/GENPARM.TBL . ; \
ln -sf ../../run/LANDUSE.TBL . ; \
ln -sf ../../run/SOILPARM.TBL . ; \
ln -sf ../../run/VEGPARM.TBL . ; \
ln -sf ../../run/RRTM_DATA . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_scm_xy/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_scm_xy/input_sounding . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
convert_em : framework_only
if [ $(WRF_CONVERT) -eq 1 ] ; then \
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" convert_em ) ; \
fi
# Link wrf.exe and wrf_SST_ESMF.exe into
# test/em_esmf_exp when ESMF_COUPLING is set. wrf.exe
# can be used for stand-alone testing in this case.
# wrf_SST_ESMF.exe is a coupled application. Note that make
# target $(SOLVER)_wrf_SST_ESMF builds wrf_SST_ESMF.exe.
em_real : wrf
@/bin/rm -f real.exe > /dev/null 2>&1
@/bin/rm -f tc.exe > /dev/null 2>&1
@/bin/rm -f ndown.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real em_real )
( cd test/em_real ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
if [ $(ESMF_COUPLING) -eq 1 ] ; then \
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real em_wrf_SST_ESMF ) ; \
( cd test/em_esmf_exp ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f wrf_SST_ESMF.exe ; ln -s ../../main/wrf_SST_ESMF.exe . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f real.exe ; ln -s ../../main/real.exe . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f ETAMPNEW_DATA.expanded_rain ETAMPNEW_DATA RRTM_DATA RRTMG_LW_DATA RRTMG_SW_DATA ; \
ln -sf ../../run/ETAMPNEW_DATA . ; \
ln -sf ../../run/ETAMPNEW_DATA.expanded_rain . ; \
ln -sf ../../run/RRTM_DATA . ; \
ln -sf ../../run/RRTMG_LW_DATA . ; \
ln -sf ../../run/RRTMG_SW_DATA . ; \
ln -sf ../../run/CAM_ABS_DATA . ; \
ln -sf ../../run/CAM_AEROPT_DATA . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP4.5 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP6 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP8.5 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.A1B . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.A2 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP119 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP126 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP245 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP245 CAMtr_volume_mixing_ratio ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP370 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP585 . ; \
ln -sf ../../run/CLM_ALB_ICE_DFS_DATA . ; \
ln -sf ../../run/CLM_ALB_ICE_DRC_DATA . ; \
ln -sf ../../run/CLM_ASM_ICE_DFS_DATA . ; \
ln -sf ../../run/CLM_ASM_ICE_DRC_DATA . ; \
ln -sf ../../run/CLM_DRDSDT0_DATA . ; \
ln -sf ../../run/CLM_EXT_ICE_DFS_DATA . ; \
ln -sf ../../run/CLM_EXT_ICE_DRC_DATA . ; \
ln -sf ../../run/CLM_KAPPA_DATA . ; \
ln -sf ../../run/CLM_TAU_DATA . ; \
ln -sf ../../run/ozone.formatted . ; \
ln -sf ../../run/ozone_lat.formatted . ; \
ln -sf ../../run/ozone_plev.formatted . ; \
ln -sf ../../run/aerosol.formatted . ; \
ln -sf ../../run/aerosol_lat.formatted . ; \
ln -sf ../../run/aerosol_lon.formatted . ; \
ln -sf ../../run/aerosol_plev.formatted . ; \
ln -sf ../../run/eclipse_besselian_elements.dat . ; \
ln -sf ../../run/CCN_ACTIVATE.BIN . ; \
ln -sf ../../run/p3_lookupTable_1.dat-v5.4_2momI . ; \
ln -sf ../../run/p3_lookupTable_1.dat-v5.4_3momI . ; \
ln -sf ../../run/p3_lookupTable_2.dat-v5.3 . ; \
ln -sf ../../run/HLC.TBL . ; \
ln -sf ../../run/wind-turbine-1.tbl . ; \
ln -sf ../../run/ishmael-gamma-tab.bin . ; \
ln -sf ../../run/ishmael-qi-qc.bin . ; \
ln -sf ../../run/ishmael-qi-qr.bin . ; \
ln -sf ../../run/BROADBAND_CLOUD_GODDARD.bin . ; \
ln -sf ../../run/STOCHPERT.TBL . ; \
if [ -n "$(DOUBLE_PRECISION)" ] ; then \
ln -sf ../../run/ETAMPNEW_DATA_DBL ETAMPNEW_DATA ; \
ln -sf ../../run/ETAMPNEW_DATA.expanded_rain_DBL ETAMPNEW_DATA.expanded_rain ; \
ln -sf ../../run/RRTM_DATA_DBL RRTM_DATA ; \
ln -sf ../../run/RRTMG_LW_DATA_DBL RRTMG_LW_DATA ; \
ln -sf ../../run/RRTMG_SW_DATA_DBL RRTMG_SW_DATA ; \
fi ) ; \
( cd test/em_esmf_exp ; /bin/rm -f GENPARM.TBL ; ln -s ../../run/GENPARM.TBL . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f LANDUSE.TBL ; ln -s ../../run/LANDUSE.TBL . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f SOILPARM.TBL ; ln -s ../../run/SOILPARM.TBL . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f URBPARM.TBL ; ln -s ../../run/URBPARM.TBL . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f URBPARM_LCZ.TBL ; ln -s ../../run/URBPARM_LCZ.TBL . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f VEGPARM.TBL ; ln -s ../../run/VEGPARM.TBL . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f MPTABLE.TBL ; ln -s ../../run/MPTABLE.TBL . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f tr49t67 ; ln -s ../../run/tr49t67 . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f tr49t85 ; ln -s ../../run/tr49t85 . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f tr67t85 ; ln -s ../../run/tr67t85 . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f gribmap.txt ; ln -s ../../run/gribmap.txt . ) ; \
( cd test/em_esmf_exp ; /bin/rm -f grib2map.tbl ; ln -s ../../run/grib2map.tbl . ) ; \
fi
( cd test/em_real ; /bin/rm -f real.exe ; ln -s ../../main/real.exe . )
( cd test/em_real ; /bin/rm -f tc.exe ; ln -s ../../main/tc.exe . )
( cd test/em_real ; /bin/rm -f ndown.exe ; ln -s ../../main/ndown.exe . )
( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd test/em_real ; /bin/rm -f README.physics_files ; ln -s ../../run/README.physics_files . )
( cd test/em_real ; /bin/rm -f ETAMPNEW_DATA.expanded_rain ETAMPNEW_DATA RRTM_DATA RRTMG_LW_DATA RRTMG_SW_DATA ; \
ln -sf ../../run/ETAMPNEW_DATA . ; \
ln -sf ../../run/ETAMPNEW_DATA.expanded_rain . ; \
ln -sf ../../run/RRTM_DATA . ; \
ln -sf ../../run/RRTMG_LW_DATA . ; \
ln -sf ../../run/RRTMG_SW_DATA . ; \
ln -sf ../../run/CAM_ABS_DATA . ; \
ln -sf ../../run/CAM_AEROPT_DATA . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP4.5 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP6 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP8.5 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.A1B . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.A2 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP119 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP126 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP245 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP245 CAMtr_volume_mixing_ratio ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP370 . ; \
ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP585 . ; \
ln -sf ../../run/CLM_ALB_ICE_DFS_DATA . ; \
ln -sf ../../run/CLM_ALB_ICE_DRC_DATA . ; \
ln -sf ../../run/CLM_ASM_ICE_DFS_DATA . ; \
ln -sf ../../run/CLM_ASM_ICE_DRC_DATA . ; \
ln -sf ../../run/CLM_DRDSDT0_DATA . ; \
ln -sf ../../run/CLM_EXT_ICE_DFS_DATA . ; \
ln -sf ../../run/CLM_EXT_ICE_DRC_DATA . ; \
ln -sf ../../run/CLM_KAPPA_DATA . ; \
ln -sf ../../run/CLM_TAU_DATA . ; \
ln -sf ../../run/ozone.formatted . ; \
ln -sf ../../run/ozone_lat.formatted . ; \
ln -sf ../../run/ozone_plev.formatted . ; \
ln -sf ../../run/aerosol.formatted . ; \
ln -sf ../../run/aerosol_lat.formatted . ; \
ln -sf ../../run/aerosol_lon.formatted . ; \
ln -sf ../../run/aerosol_plev.formatted . ; \
ln -sf ../../run/eclipse_besselian_elements.dat . ; \
ln -sf ../../run/capacity.asc . ; \
ln -sf ../../run/coeff_p.asc . ; \
ln -sf ../../run/coeff_q.asc . ; \
ln -sf ../../run/constants.asc . ; \
ln -sf ../../run/masses.asc . ; \
ln -sf ../../run/termvels.asc . ; \
ln -sf ../../run/kernels.asc_s_0_03_0_9 . ; \
ln -sf ../../run/kernels_z.asc . ; \
ln -sf ../../run/bulkdens.asc_s_0_03_0_9 . ; \
ln -sf ../../run/bulkradii.asc_s_0_03_0_9 . ; \
ln -sf ../../run/CCN_ACTIVATE.BIN . ; \
ln -sf ../../run/p3_lookupTable_1.dat-v5.4_2momI . ; \
ln -sf ../../run/p3_lookupTable_1.dat-v5.4_3momI . ; \
ln -sf ../../run/p3_lookupTable_2.dat-v5.3 . ; \
ln -sf ../../run/HLC.TBL . ; \
ln -sf ../../run/wind-turbine-1.tbl . ; \
ln -sf ../../run/ishmael-gamma-tab.bin . ; \
ln -sf ../../run/ishmael-qi-qc.bin . ; \
ln -sf ../../run/ishmael-qi-qr.bin . ; \
ln -sf ../../run/BROADBAND_CLOUD_GODDARD.bin . ; \
ln -sf ../../run/STOCHPERT.TBL . ; \
if [ -n "$(DOUBLE_PRECISION)" ] ; then \
ln -sf ../../run/ETAMPNEW_DATA_DBL ETAMPNEW_DATA ; \
ln -sf ../../run/ETAMPNEW_DATA.expanded_rain_DBL ETAMPNEW_DATA.expanded_rain ; \
ln -sf ../../run/RRTM_DATA_DBL RRTM_DATA ; \
ln -sf ../../run/RRTMG_LW_DATA_DBL RRTMG_LW_DATA ; \
ln -sf ../../run/RRTMG_SW_DATA_DBL RRTMG_SW_DATA ; \
fi )
( cd test/em_real ; if test -d ../../run/SBM_input_33 ; then \
ln -sf ../../run/SBM_input_33 . ; \
ln -sf ../../run/scattering_tables_2layer_high_quad_1dT_1%fw_110 . ; \
fi )
( cd test/em_real ; /bin/rm -f GENPARM.TBL ; ln -s ../../run/GENPARM.TBL . )
( cd test/em_real ; /bin/rm -f LANDUSE.TBL ; ln -s ../../run/LANDUSE.TBL . )
( cd test/em_real ; /bin/rm -f SOILPARM.TBL ; ln -s ../../run/SOILPARM.TBL . )
( cd test/em_real ; /bin/rm -f URBPARM.TBL ; ln -s ../../run/URBPARM.TBL . )
( cd test/em_real ; /bin/rm -f URBPARM_LCZ.TBL ; ln -s ../../run/URBPARM_LCZ.TBL . )
( cd test/em_real ; /bin/rm -f VEGPARM.TBL ; ln -s ../../run/VEGPARM.TBL . )
( cd test/em_real ; /bin/rm -f MPTABLE.TBL ; ln -s ../../run/MPTABLE.TBL . )
( cd test/em_real ; /bin/rm -f tr49t67 ; ln -s ../../run/tr49t67 . )
( cd test/em_real ; /bin/rm -f tr49t85 ; ln -s ../../run/tr49t85 . )
( cd test/em_real ; /bin/rm -f tr67t85 ; ln -s ../../run/tr67t85 . )
( cd test/em_real ; /bin/rm -f gribmap.txt ; ln -s ../../run/gribmap.txt . )
( cd test/em_real ; /bin/rm -f grib2map.tbl ; ln -s ../../run/grib2map.tbl . )
( cd run ; /bin/rm -f real.exe ; ln -s ../main/real.exe . )
( cd run ; /bin/rm -f tc.exe ; ln -s ../main/tc.exe . )
( cd run ; /bin/rm -f ndown.exe ; ln -s ../main/ndown.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/real.exe -a -e main/ndown.exe -a -e main/tc.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_hill2d_x : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
( cd test/em_hill2d_x ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_hill2d_x ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_hill2d_x ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_hill2d_x/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_hill2d_x/input_sounding . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_grav2d_x : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
( cd test/em_grav2d_x ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_grav2d_x ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_grav2d_x ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_grav2d_x/namelist.input . )
( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_grav2d_x/input_sounding . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
em_heldsuarez : wrf
@/bin/rm -f ideal.exe > /dev/null 2>&1
@/bin/rm -f wrf.exe > /dev/null 2>&1
@ echo '--------------------------------------'
( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=heldsuarez em_ideal )
( cd test/em_heldsuarez ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
( cd test/em_heldsuarez ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
( cd test/em_heldsuarez ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_heldsuarez/namelist.input . )
@echo " "
@echo "=========================================================================="
@echo "build started: $(START_OF_COMPILE)"
@echo "build completed:" `date`
@if test -e main/wrf.exe -a -e main/ideal.exe ; then \
echo " " ; \
echo "---> Executables successfully built <---" ; \
echo " " ; \
ls -l main/*.exe ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
else \
echo " " ; \
echo "---> Problems building executables, look for errors in the build log <---" ; \
echo " " ; \
echo "==========================================================================" ; \
echo " " ; \
fi
#### anthropogenic emissions converter
emi_conv : wrf
@ echo '--------------------------------------'
( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_emiss )
( cd test/em_real ; /bin/rm -f convert_emiss.exe ; ln -s ../../chem/convert_emiss.exe . )
( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
#### emissions opt 3 converter
opt3_conv : wrf
@ echo '--------------------------------------'
( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_fireemiss )
( cd test/em_real ; /bin/rm -f convert_fireemiss.exe ; ln -s ../../chem/convert_fireemiss.exe . )
( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
#### biogenic emissions converter
bio_conv : wrf
@ echo '--------------------------------------'
( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_bioemiss )
( cd test/em_real ; /bin/rm -f convert_bioemiss.exe ; ln -s ../../chem/convert_bioemiss.exe . )
( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
bioemiss_conv_megan2 : wrf
@ echo '--------------------------------------'
( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_bioemiss_megan2 )
( cd test/em_real ; /bin/rm -f convert_bioemiss_megan2.exe ; ln -s ../../chem/convert_bioemiss_megan2.exe . )
( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
#### DMS emissions converter
dms_conv : wrf
@ echo '--------------------------------------'
( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_dms )
( cd test/em_real ; /bin/rm -f convert_dms.exe ; ln -s ../../chem/convert_dms.exe . )
( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
#### Dust errosion factor emissions converter
dust_conv : wrf
@ echo '--------------------------------------'
( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_dust )
( cd test/em_real ; /bin/rm -f convert_dust.exe ; ln -s ../../chem/convert_dust.exe . )
( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
#### GOCART background state for oh, no3 and h2o2 converter
gocart_conv : wrf
@ echo '--------------------------------------'
( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_gocart )
( cd test/em_real ; /bin/rm -f convert_gocart.exe ; ln -s ../../chem/convert_gocart.exe . )
( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
( cd run ; if test -f namelist.input ; then \
/bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
/bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
io :
@ echo '--------------------------------------'
( cd tools ; $(MAKE) standard.exe )
( $(MAKE) io_only )
( $(MAKE) MODULE_DIRS="$(ALL_MODULES)" toolsdir )
( cd frame ; $(MAKE) module_driver_constants.o pack_utils.o module_machine.o module_internal_header_util.o wrf_debug.o )
( cd frame ; $(AR) $(ARFLAGS) ../main/libwrflib.a module_driver_constants.o pack_utils.o module_machine.o \
module_internal_header_util.o module_wrf_error.o wrf_debug.o )
ext :
@ echo '--------------------------------------'
if [ $(WRF_PLUS_CORE) -eq 0 ] ; then \
( cd frame ; $(MAKE) externals ) ; \
else \
( cd frame ; $(MAKE) PLUSFLAG="-DWRFPLUS=1" externals ) ; \
fi
framework :
@ echo '--------------------------------------'
( cd frame ; $(MAKE) $(J) LLIST="$(LINKLIST)" framework ; \
cd ../external/io_netcdf ; \
$(MAKE) NETCDFPATH="$(NETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
FC="$(FC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
LIB_LOCAL="$(LIB_LOCAL)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf; \
cd ../io_netcdf ; \
$(MAKE) NETCDFPATH="$(NETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
LIB_LOCAL="$(LIB_LOCAL)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
cd ../io_netcdfpar ; \
$(NETCDFPAR_BUILD) $(MAKE) NETCDFPARPATH="$(NETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
FC="$(FC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
LIB_LOCAL="$(LIB_LOCAL)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf; \
cd ../io_netcdfpar ; \
$(NETCDFPAR_BUILD) $(MAKE) NETCDFPARPATH="$(NETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
LIB_LOCAL="$(LIB_LOCAL)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
cd ../io_pio ; \
echo SKIPPING PIO BUILD $(MAKE) NETCDFPATH="$(PNETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
LIB_LOCAL="$(LIB_LOCAL)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
cd ../io_int ; \
$(MAKE) SFC="$(SFC) $(FCBASEOPTS)" \
FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" \
RANLIB="$(RANLIB)" CPP="$(CPP) $(ARCH_LOCAL)" DM_FC="$(DM_FC) $(FCBASEOPTS)"\
TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf ; \
cd ../../frame )
framework_plus :
@ echo '--------------------------------------'
( cd frame ; $(MAKE) $(J) LLIST="$(MODLL)" framework ; \
cd ../external/io_netcdf ; \
$(MAKE) NETCDFPATH="$(NETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
FC="$(FC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
LIB_LOCAL="$(LIB_LOCAL)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf; \
cd ../io_netcdf ; \
$(MAKE) NETCDFPATH="$(NETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
LIB_LOCAL="$(LIB_LOCAL)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
cd ../io_pio ; \
echo SKIPPING PIO BUILD $(MAKE) NETCDFPATH="$(PNETCDFPATH)" \
FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
LIB_LOCAL="$(LIB_LOCAL)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
cd ../io_int ; \
$(MAKE) SFC="$(SFC) $(FCBASEOPTS)" \
FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" \
RANLIB="$(RANLIB)" CPP="$(CPP) $(ARCH_LOCAL)" DM_FC="$(DM_FC) $(FCBASEOPTS)"\
TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf ; \
cd ../../frame )
shared :
@ echo '--------------------------------------'
if [ "`echo $(J) | sed -e 's/-j//g' -e 's/ \+//g'`" -gt "6" ] ; then \
if [ $(WRF_PLUS_CORE) -eq 0 ] ; then \
( cd share ; $(MAKE) -j 6 PERTMOD=" " ) ; \
else \
( cd share ; $(MAKE) -j 6 PERTMOD="$(MODPT)" ) ; \
fi \
else \
if [ $(WRF_PLUS_CORE) -eq 0 ] ; then \
( cd share ; $(MAKE) $(J) PERTMOD=" " ) ; \
else \
( cd share ; $(MAKE) $(J) PERTMOD="$(MODPT)" ) ; \
fi \
fi
wrf_hydro :
@ echo '----------wrf_hydro-----------------------'
if [ $(WRF_HYDRO) -eq 1 ] ; then (cd hydro/CPL/WRF_cpl; make -f Makefile.cpl) ; fi
chemics :
@ echo '--------------------------------------'
if [ $(WRF_KPP) -eq 1 ] ; then ( cd chem ; $(MAKE) ) ; fi
if [ $(WRF_KPP) -eq 0 ] ; then \
if [ "`echo $(J) | sed -e 's/-j//g' -e 's/ \+//g'`" -gt "16" ] ; then \
( cd chem ; $(MAKE) -j 16 ) ; \
else \
( cd chem ; $(MAKE) $(J) ) ; \
fi \
fi
# ( cd chem ; $(MAKE) )
# ( cd chem ; $(MAKE) $(J) )
physics :
@ echo '--------------------------------------'
if [ $(WRF_CHEM) -eq 0 ] ; then \
( cd phys ; $(MAKE) submodules ; $(MAKE) CF2=" " ) ; \
if [ -n "$(WRF_CMAQ)" ] && [ $(WRF_CMAQ) -eq 1 ] ; then \
@ echo '----------- make cmaq ----------------' ; \
( rm -f main/libcmaqlib.a; cd cmaq ; $(MAKE) -f Makefile.twoway ) ; \
fi \
else \
( cd phys ; $(MAKE) submodules ; $(MAKE) CF2="$(CHEM_FILES2)" ) ; \
fi
physics_plus :
if [ $(WRF_PLUS_CORE) -eq 0 ] ; then \
( cd phys ; $(MAKE) submodules ; $(MAKE) PHYS_PLUS=" " PHYS_MP=" " PHYS_BL=" " PHYS_CU=" " ) ; \
else \
( cd phys ; $(MAKE) submodules ; $(MAKE) PHYS_PLUS="$(MODS4)" PHYS_MP="$(MODMP)" PHYS_BL="$(MODBL)" PHYS_CU="$(MODCU)" ) ; \
fi
wrftlmadj :
@ echo '--------------------------------------'
( cd wrftladj ; $(MAKE) $(J) wrftladj )
em_core :
@ echo '--------------------------------------'
if [ $(WRF_CHEM) -eq 0 ] ; then \
CF= ; \
else \
CF="$(CHEM_FILES)" ; \
fi
( cd dyn_em ; $(MAKE) $(J) CF="$(CF)" )
# rule used by configure to test if this will compile with MPI 2 calls MPI_Comm_f2c and _c2f
mpi2_test :
@ cd tools ; /bin/rm -f mpi2_test ; $(CC) -c mpi2_test.c ; cd ..
# rule used by configure to test if this will compile with MPI 2 calls MPI_Init_thread
mpi2_thread_test :
@ cd tools ; /bin/rm -f mpi2_thread_test ; $(CC) -c mpi2_thread_test.c ; cd ..
# rule used by configure to test if fseeko and fseeko64 are supported (for share/landread.c to work right)
fseek_test :
@ cd tools ; /bin/rm -f fseeko_test ; $(SCC) -DTEST_FSEEKO -o fseeko_test fseek_test.c ; cd ..
@ cd tools ; /bin/rm -f fseeko64_test ; $(SCC) -DTEST_FSEEKO64 -o fseeko64_test fseek_test.c ; cd ..
# rule used by configure to test if this will compile with netcdf4
nc4_test:
if [ -z "$(USENETCDFPAR)" ] || [ $(USENETCDFPAR) -eq 0 ] ; then \
( cd tools ; /bin/rm -f nc4_test.{exe,nc,o} ; $(SCC) -o nc4_test.exe nc4_test.c -I$(NETCDF_C)/include $(NETCDF4_DEP_LIB) ; cd .. ) ; \
else \
( cd tools ; /bin/rm -f nc4_test.{exe,nc,o} ; $(DM_CC) -o nc4_test.exe nc4_test.c -I$(NETCDF_C)/include $(NETCDF4_DEP_LIB) ; cd .. ) ; \
fi
# rule used by configure to test if Fortran 2003 IEEE signaling is available
fortran_2003_ieee_test:
@cd tools ; /bin/rm -f fortran_2003_ieee_test.{exe,o} ; $(SFC) -o fortran_2003_ieee_test.exe fortran_2003_ieee_test.F ; cd ..
# rule used by configure to test if Fortran 2003 ISO_C support is available
fortran_2003_iso_c_test:
@cd tools ; /bin/rm -f fortran_2003_iso_c_test.{exe,o} ; $(SFC) -o fortran_2003_iso_c_test.exe fortran_2003_iso_c_test.F ; cd ..
# rule used by configure to test if Fortran 2003 FLUSH intrinsic subroutine support is available
fortran_2003_flush_test:
@cd tools ; /bin/rm -f fortran_2003_flush_test.{exe,o} ; $(SFC) -o fortran_2003_flush_test.exe fortran_2003_flush_test.F ; cd ..
# rule used by configure to test if Fortran 2003 FLUSH intrinsic subroutine is replaced by FFLUSH (thanks xlf)
fortran_2003_fflush_test:
@cd tools ; /bin/rm -f fortran_2003_fflush_test.{exe,o} ; $(SFC) -o fortran_2003_fflush_test.exe fortran_2003_fflush_test.F ; cd ..
# rule used by configure to test if Fortran 2008 gamma intrinsic function is available
fortran_2008_gamma_test:
@cd tools ; /bin/rm -f fortran_2008_gamma_test.{exe,o} ; $(SFC) -o fortran_2008_gamma_test.exe fortran_2008_gamma_test.F ; cd ..
# rule used by configure to test for RPC support
rpc_test:
@cd tools ; /bin/rm -f rpc_test.exe ; $(SCC) -DUSE_TIRPC -o rpc_test.exe rpc_test.c ; $(SCC) -o rpc_test.exe rpc_test.c; cd ..
toolsdir :
@ echo '--------------------------------------'
if [ $(WRF_PLUS_CORE) -eq 0 ] ; then \
( cd tools ; $(MAKE) CC_TOOLS_CFLAGS="$(CC_TOOLS_CFLAGS)" CC_TOOLS="$(CC_TOOLS) -DIWORDSIZE=$(IWORDSIZE) -DMAX_HISTORY=$(MAX_HISTORY)" ) ; \
else \
( cd tools ; $(MAKE) CC_TOOLS_CFLAGS="$(CC_TOOLS_CFLAGS)" CC_TOOLS="$(CC_TOOLS) -DIWORDSIZE=$(IWORDSIZE) -DMAX_HISTORY=$(MAX_HISTORY) -DWRFPLUS=1" ) ; \
fi
# ( cd tools ; $(MAKE) CC_TOOLS="$(CC_TOOLS) -DIO_MASK_SIZE=$(IO_MASK_SIZE)" )
# Use this target to build stand-alone tests of esmf_time_f90.
# Only touches external/esmf_time_f90/.
esmf_time_f90_only :
@ echo '--------------------------------------'
( cd external/esmf_time_f90 ; $(MAKE) FC="$(FC) $(FCFLAGS)" CPP="$(CPP) -DTIME_F90_ONLY" tests )
clean :
@ echo 'Use the clean script'
# DO NOT DELETE
Вы можете оставить комментарий после Вход в систему
Неприемлемый контент может быть отображен здесь и не будет показан на странице. Вы можете проверить и изменить его с помощью соответствующей функции редактирования.
Если вы подтверждаете, что содержание не содержит непристойной лексики/перенаправления на рекламу/насилия/вульгарной порнографии/нарушений/пиратства/ложного/незначительного или незаконного контента, связанного с национальными законами и предписаниями, вы можете нажать «Отправить» для подачи апелляции, и мы обработаем ее как можно скорее.
Опубликовать ( 0 )